MR2 Owners Club Forum banner

2GR-FSE injectors

7.1K views 8 replies 7 participants last post by  Mr2gus  
#1 ·
Hello guys

I’m new to this website and I would like your help.

I have just finish my project 2014 IS350 RWD TwinTurbo ( 2GR-FSE )

The car made 645HP ( 545WHP ) on Dyno jet @15 psi on pump gas

I have only changed the pistons to forged and rods ARP2000 but bore and compression is stock

I’m looking to swap my port injectors for larger one. As I know the stock port injectors rated 295 cc

I want something that’s 500 or 600 cc and fits bolts on.

I have searched everywhere and I couldn’t find any company that makes port injectors that’s fits bolts on to the 2GR-FSE engine.

If anyone can help me I would be thankful.

Picture attached of the stock port injectors.

If anyone want to see my build follow me on Instagram ; @9mesh
 

Attachments

#4 ·
I have searched everywhere and I couldn’t find any company that makes port injectors that’s fits bolts on to the 2GR-FSE engine.
As you may be aware those are the same as FR-S/BRZ/86 so I checked Deatschwerks and they do have some options however short nose.



Image
 
#6 ·
As you may be aware those are the same as FR-S/BRZ/86 so I checked Deatschwerks and they do have some options however short nose.



Image
Hello, in my search for port injectors for my 2ur-fse i found out that the ones in the 2gr-fse also fits. How did you find out that fa20 port injectors fit the 2gr-fse

Added a picture of the injectors i need to replace with bigger ones
Image
 
#7 ·
I dont recall what I was looking at before but here is a quick comparison

Scion fr-s


Image


And 2gr-fse (is350)

Image



There are some similarities but they are not the same. I doubt they can be interchanged. I don't think either one can be interchanged with the one you pictured.