MR2 Owners Club Forum banner

Gen5 ST246 Injectors?

1 reading
8.6K views 18 replies 8 participants last post by  jsmerigian  
#1 · (Edited)
Anyone have a reliable and affordable source for the 540cc long reach injectors that come stock in the Caldina ST246 gen5 3sgte? They are the ones in the bottom of the picture. Part number is listed as either 23250-74280 or 23209-74280. Specifically looking for these injectors not a aftermarket substitute. There are listings on ebay for these injectors from sellers in China but... IJDK. Thanks for any help.
Image

Image
 
#2 ·
Anyone have a reliable and affordable source for the 540cc long reach injectors that come stock in the Caldina ST246 gen5 3sgte? They are the ones in the bottom of the picture. Part number is listed as either 23250-74280 or 23209-74280. Specifically looking for these injectors not a aftermarket substitute. There are listings on ebay for these injectors from sellers in China but... IJDK. Thanks for any help.
You are either looking at Toyota themselves or $214USD each https://www.amayama.com/en/part/toyota/2320974280?currency=840&q=
Or you can buy them from Ebay, Aliexpress for around $90USD for 4. https://www.aliexpress.com/item/100...-Injector-23250-74280-23209-74280-For-Toyota-Caldina-2-0-05-06/32304730489.html
 
#6 · (Edited)
#11 · (Edited)
I was not interested in sucking it up, this is not an operating feature of my personality. I have sourced a supply of long-nose gen5 540 injectors at an average price of about $25, payed about $20 each to clean them, and they are ready to go - I bought two sets of four so I have two spares if needed. Stock 360 shown for comparison.

Image
 
#17 ·
Hey! I just found this post. I’m desperately trying to source some of these oem injectors because the aftermarket ones I have don’t work. Do you have a set I could buy or a source where you got them from? Any help is appreciated
 
#14 ·
I don't need them, and I'm not a punk. That isn't to say someone searching via Google wont find this thread and hope to get some info on the injectors and find its just you being.... a b!tch. But thanks for the worthless reply anyway. Entire thread is worthless. But oh no, this place is dying :rolleyes:
 
#15 ·
Have you thought about getting a fuel rail and just going Bosche? That what I did. I like just moving to a Bosche solution. Seems easier to move around.
 
#16 ·
Hey! I’m desperately trying to track down a set of these. Do you have 4 for sale or could share where you were able to source them? The ones I got that were supposed to be direct replacements don’t work and I don’t have the originals anymore