MR2 Owners Club Forum banner

Cover - Flywheel Housing PART NUMBERS

10 views 1 reply 2 participants last post by  rmeller  
#1 · (Edited)
Hello, i have a 12/1986 and my flywheel under cover is missing. I have seen that there are 3 different part numbers for this piece (see image).
Image
Image



Is there any difference between this versions. They all seem to replace each other (at least thats what yoshiparts says). Maybe the newer versions are better designed? Well the problem is that this car is in between mk1a and b so im never sure if im picking the correct piece.

Here is also attached a photo of the flywheel. Should i be concerned about the rust?.
Image
 
12/1986 4-AGECL, 116 CV, Blue top
#2 ·
3/87 could be about when the transmission changed from c50 to c52. Since this cover mounts to the transmission, that could be significant. I think that the most apparent difference between the transmissions is that the c52 has two mounting locations for the starter, and the c50 only one.