[mr2y2k]

Hello
Our 88 SC won’t go to gear today. It was running fine couple days ago, but now just won’t go to gear. I could start in gear but it won’t be able to shift.
Things had done such as replaced transmission oil, bleeding clutch in pass year. What could go wrong? Help
Thanks
Simon

 

[mikemo]

Very common to have hydraulic leaks in the clutch master or slave cylinders. Check the level of fluid in the clutch master cylinder reservoir.

 

[rmeller]

Not able to shift into gear with engine running means that the clutch is not disengaging. That could be due to hydraulic problem as mentioned above, or clutch physically broken. Make sure that you eliminate hydraulic issues before you drop the transmission to replace the clutch. First thing to do is see if the release fork moves when you depress the pedal.

 

[mr2y2k]

Thanks for replying
Went out check all fluid is good. In neutral, all gears shift ok. I had same problem with Miata before, then I changed the clutch and fly wheel and everything was good. Wondering if this same case
Simon

 

[rmeller]

... Wondering if this same case...

Go and find out. Read what I wrote and do what I said. Then report back.