MR2 Owners Club Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #1 ·
Continued from.

http://mr2oc.com/showthread.php?t=153840

Lots of progress... but no new pics yet.. Sorry.

I get the motor next week. Should be assembled and running next weekend.
Expect lots of pics next week.

Here's something for you guys..

Venom Injectors Suck!

I had the 660's flow tested at WhichHunter
See this thread... http://mr2oc.com/showthread.php?p=1630710

I picked up 4 of RC's 550cc injectors made for the mk3 supra. I am happy with this purchase. RC has a great reputation.

Marco
 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #4 · (Edited)
Ok some progress pics...

95T Shifter installed...







 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #5 ·
During the installation of the Firewall barrier.

(Note: Gas tank is not installed... and I was not finished yet)





 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #6 ·
New Tial 50mm BOV.

Hopefully I wont get any compressor surge with this bad boy like I was with the (crappy) HKS.





 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #7 · (Edited)
New SPEC stage 2+ (supposed to be between stage 2 and 3)

Notice it's button style on one side and full face on the other side.

I loved the feel of my SPEC stage 1... but it was already pretty well worn... and I just wanted something slightly more grabby.



 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #8 ·
Oil cooler.




DP, turbine housing and Manifold wrapped



New fidanza cam gears

 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #9 ·
that's all for now... I get the motor next week... so I expect to be done next sunday :)
 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #12 ·
thanks Chad...

I am officially broke now :( I decided to paint my charred up engine lid and my Buddy Club replica lip Super Red II.

Damn.... so broke.

I really hope this setup kicks ass, and make it all worth it in the end.

Marco
 

·
Registered
Joined
·
4,603 Posts
I am not spending nearly as much on my setup as you are, but I still have the same feelings about it being worth it in the end. I can only imagine what your expectations could be.
BTW...I opted for a smallport head/manifold setup to get the best response and midrange power. Hopefully I can take the head in to the machine shop next week to get a rebuild and slight porting work done.
 

·
Registered
Joined
·
4,486 Posts
Discussion Starter · #15 ·
Still wating on the motor.

The head has been shipped and will be here on Monday.

Looks like come time between Wed-Fri for the short block.

The car will be finished next weekend.

I'll start a part 3 (final) thread when I get the head on Monday since that's when I'll have some new pics.

Marco
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top