MR2 Owners Club Forum banner

what gauge do I need?????

300 Views 5 Replies 4 Participants Last post by  piapia
Make this short, I an getting boost controller to raise my boost to 14psi or 15psi. I know that I need an boost gauge. I go to mountain alot. usually my engine rev over 5500 rpm in the monuntain, so I am wondering do I need other gauge( such like oil/water temperture gauge)? other Question is my engine is JDM 2gen(almost stock expect intake),Is there any problem if I raise my boost to 15psi? Thanks.
1 - 6 of 6 Posts
EGT = Exhaust Gas Temperature
Just a boost gauge. You have no need to monitor EGTs (A/F) to run 14-15 psi on the CT26. The ECU and OEM fuel system will handle it just fine.

bill
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top