MR2 Owners Club Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
123 Posts
Discussion Starter #1 (Edited)


Toyota MR2 License Plate LEDs

(Supra shown for demonstration)


License plate bulbs are used to illuminate the rear license plate on your vehicle. From the factory, the bulbs are incandescent, lighting up in a yellowish color.

Newer luxury cars use LED modules to illuminate the license plate with modern, cool white light. By changing your license plate bulbs to LED, you can easily add this luxury look to your MR2!

The installation is 100% plug-and-play, just replace your factory bulb.

With low price and easy install, this is one of the best, easiest modifications you can do to improve how your MR2 looks at night.

Diode Dynamics offers several bulb options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb:


SMD2: Slightly higher brightness than OEM bulbs. (24 lumens)
HP3: Much brighter than OEM bulbs. These are bright! (56 lumens)
HP5: Nearly triple the brightness of stock OEM bulbs! (92 lumens)

Bulb Design



SMD2: Similarly compact design, with two 5050-size Epistar SMD chips, driven at high power for maximum effective brightness. Outputs at 180 degrees.

HP3: One high-power SMD under a diffusing lens for truly even output (no hotspots). Constant current design and air-cooled base for superior reliability. Features dual contact pins and nonpolar function for easy installation.

HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

These bulbs are made up of a quality plastic connector to slide right into the plug, as well as high durability terminals. A load resistor is embedded to prevent blowing the LEDs from voltage surge, and a diode is implanted to protect the LEDs from reverse polarity. The LED is wired for 12V operation, the kind found on all vehicles.

Included in your order is TWO BULBS (to fit your MR2).

All of our products come with a 30-day satisfaction guarantee and a 3-year limited warranty.

Toyota MR2 License Plate LEDs




LED 194 Bulb Models




Toyota MR2 License Plate LEDs


If you have any questions, please don't hesitate to post, PM, or Email [email protected]

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.
Diode Dynamics
 

·
Registered
Joined
·
123 Posts
Discussion Starter #3
you guys should sell some kind of LED package for each gen of the car so you cna just get everything you need at one time.
We typically do once we've had the car in our studio for comparison photos and installation videos.

It's not easy to find a bone stock MR2 of any generation here in St. Louis, but we are still on the hunt!

In the meantime, if you have any questions about fitment, please don't hesitate to reach out to us

Thanks!
Nick C.
 

·
Registered
Joined
·
45 Posts
We typically do once we've had the car in our studio for comparison photos and installation videos.

It's not easy to find a bone stock MR2 of any generation here in St. Louis, but we are still on the hunt!

In the meantime, if you have any questions about fitment, please don't hesitate to reach out to us

Thanks!
Nick C.
I know you guys brought in customer cars with the evo x to get all the led fitments, my mk2 is completely stock as far as lights go. I've got a gen4 swap and some gauges on the A-pillar though.

Stock headlights, no oem fogs, stock 92 tails, stock license plate light(if it works?), I think stock dome light bulbs too.

I'm about 3.5 hours away near south Indy and would be willing to drive there one weekend when the snow clears up for you guys to do fitment checks, maybe cut me a deal on some leds once we figure out what goes where:smile:
 

·
Registered
Joined
·
123 Posts
Discussion Starter #5
I know you guys brought in customer cars with the evo x to get all the led fitments, my mk2 is completely stock as far as lights go. I've got a gen4 swap and some gauges on the A-pillar though.

Stock headlights, no oem fogs, stock 92 tails, stock license plate light(if it works?), I think stock dome light bulbs too.

I'm about 3.5 hours away near south Indy and would be willing to drive there one weekend when the snow clears up for you guys to do fitment checks, maybe cut me a deal on some leds once we figure out what goes where:smile:
Shoot us an email!

[email protected]

Thanks!
Nick C.
 

·
Registered
Joined
·
123 Posts
Discussion Starter #11

LAST CHANCE TO SAVE!!! Until 11:59 p.m. CST on 12/2/2019, you can use coupon code "BLACKFRIDAY" at checkout for 20% off your entire order of lighting upgrades, including our NEW SS3 LED Pods!!! Don't wait, this sale ends TONIGHT!


Jake H.
Diode Dynamics

Sale ends 11:59 p.m. CST on Monday 12/2/2019. Cannot be combined with other coupon codes.
 
1 - 11 of 11 Posts
Top