MR2 Owners Club Forum banner

1261 - 1274 of 1274 Posts

·
Registered
Joined
·
10 Posts
Hello, I have a 18x10.5 et 15 in the rear of my sw20, I bought camber bolts but it isn’t enough. What do you guys recommend so I can run more negative camber?
 

·
Registered
Joined
·
4,473 Posts
Thanks, I just need to figure out how to add more negative camber. All I find is camber bolts, in my 350z you just buy adjustable camber arms.
Somethings just aren’t suppose to fit tho... obviously this isn’t a track car... crash bolts might help, I run them up front to clear 8” fronts, and mine doesn’t rub, and it can’t rub. Crash bolts will give you some wiggle room
 

·
Registered
Joined
·
10 Posts
I was looking at older post and there quite a few running more aggressive setups than my car. I was hoping that they would chime in.
Somethings just aren’t suppose to fit tho... obviously this isn’t a track car... crash bolts might help, I run them up front to clear 8” fronts, and mine doesn’t rub, and it can’t rub. Crash bolts will give you some wiggle room
 
1261 - 1274 of 1274 Posts
Top