MR2 Owners Club Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1,947 Posts
Discussion Starter #1
http://carpron.com/multisite/v/Upload/album349/MVC-003F_001.JPG.html

I bought this kit awhile back, im most likley going to be selling it for an NST kit. The reason why im thinking about selling the speedchaser pulley, is because I became intimidated at the idea of needing "shims to fill the air gap?" I have no idea how i'd manage that one. So i was wondering if this picture, has everything i'd need to install this kit and have it work properly?
 

·
Premium Member
Joined
·
10,360 Posts
You can get the shims you need from MCMaster-Carr. Run a search for Speedchaser install. IIRC Kenny (Supermr2) had a brief writeup.
 

·
Registered
Joined
·
356 Posts
Your best bet would be www.NonStopTuning.com :) They have crank pulleys that many of us are using around here.

You can also put a smaller pulley on the supercharger, but the SC12 has a funky clutch design which is difficult to work with and a pulley like this would be very hard to find and cost a lot more than the NST stuff.
 
1 - 9 of 9 Posts
Top