MR2 Owners Club Forum banner

S54/E153 mount compatibility?

404 Views 12 Replies 7 Participants Last post by  MIDSHIP89
I’m swapping out the S54 trans for an E153 finally, 8 years post gen4 swap. I noticed the rear bracket from the S54 doesn’t bolt up to the E153, so I’ll have to get that bracket. But what about the rubber side?

Are the front mount parts compatible? The bolt holes line up from the bracket to the transmission, but will there be an alignment issue with S54 hardware on the front of the E153?
1 - 1 of 13 Posts
I use a front turbo mount and front s54 bracket with my s54 if that helps. The rears are visually obviously different side by side.
1 - 1 of 13 Posts