MR2 Owners Club Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
190 Posts
Discussion Starter · #1 ·
guy at a local shop gave me a bunch of MR2 parts left over from front and rear clips, i have with me 90-92 spec amber 2-chamber bumper lights and i was wondering if i had to do any re-wiring to make the lights work like factory, as in have the small outer light on as the parking lamp and the large inner light as turn signal only...
?
 

·
They call me LUCKY!
Joined
·
4,923 Posts
white 91 if your saying that the lights you have now have 2 chambers than there are 1 lamps that go in it so you would need to do a little bit of rewiring but very basic stuff
 

·
2 less in Richmond.
Joined
·
20,801 Posts
splice the wire and make 2 ends. one can become 2 very easily with some basic electrical skills. If your not sure take it to your mechanic, he can do this pretty easily. Just make sure to insulate any splices well so you dont leave it open for a possible short.
 

·
2 less in Richmond.
Joined
·
20,801 Posts
arking said:
ya i know it's easy but then i dont really want cut the original wires ><

That maybe your only option.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top