MR2 Owners Club Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 91' SW20 MR2 N/A. My main beam doesn't work when i flick the switch, sometimes it works when i flick it between main beam and dip beam on and off multiple times. Although if I flash my main beam it turns on instantly. Is this possibly a bad relay, and if so where do I locate it? Thanks for any help :)
 

·
Registered
Joined
·
1,513 Posts
It's more likely the contacts on the control stalk inside the cowl cover. If it works with the flash function then it's not the bulbs or wiring.
The same wire and pin from this unit carries the power to the high beam part of the bulb from both the flash and high function.
 
1 - 3 of 3 Posts
Top