MR2 Owners Club Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,311 Posts
Discussion Starter #1
Gents,

I just installed my Pivot controller, but it works the wrong way.
When I turn on my lights it opens all the way, then when I close them the Pivot stops them at the % I've set.

Anyone knows how to solve this?

http://www.next-gear.com/tim/pivot/pivot.html

I followed this guide and I thought it should work.
The only difference is I connected the gray wire to my radio (the wire that always has power) instead of directly to the battery, in my opinion this shouldn't matter, as the radiowire also goes directly to the battery.

Please help.
 

·
Registered
Joined
·
1,311 Posts
Discussion Starter #3
Thanx man.

Can't I just re-arrange the pins in the connector? swapping the yellow for the blue one?
 

·
Registered
Joined
·
4,110 Posts
No, you have to change the wire that you splice into. You probably spliced one that was yellow. Connect that one back up, and splice into the blue wire. Unless you are talking about rearranging the pins on the cars wiring, but I dont think I would do that.
 
1 - 4 of 4 Posts
Top