MR2 Owners Club Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,708 Posts
Discussion Starter · #1 · (Edited)
hello all,

i'm getting some new rims and need to find a good offset( with a FAT lip) . i will be running 18x7 in the front and 18x9.5 in the rear, i'm thinking about a +38 offset in the front and +40 in the rear, will these clear? i'm almost positive i'll have to roll my fenders (not a problem) , what will these sit flush and give me the huge lip that i want? thanks all, some enlightenment will help me alot, thanks!

-don

my second option was going +10 in the front and -2 in the rear :)


edit: PICS PLEASE!!!!
 

·
Registered
Joined
·
966 Posts
i have a 18x9 with a 38 offset and your are def. have to roll the fenders. i am not sure if you can fit a 9.5 you would have to run a 245 or thinner. i am running a 255 and i have my fenders rolled and they rub sometimes on a hard bump. my fenders are not rolled compelety though. you might have to have the fender pulled to fit the 9.5
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top