[CapnKestrel]

Do you have a diagram with the part you need for clarity? I might have just what you need.

 

[Revenant]

its the part in circle aka part 15781

 

[CapnKestrel]

So you only want the plate with the orange o-ring in this picture?

I have a junk motor I can pull mine off of, just want to make sure it's the right part haha.

 

[J.harris]

Be careful when installing the large center bolt into the oil cooler bracket. Years ago I didn't know any better and cross threaded it, oil leaked everywhere and I had to buy a new bracket. The center bolt should thread all the way down by hand easily, don't turn it with a wrench until it bottoms out.

 

[Revenant]

Yea the previous owner had cross threaded it but it didn’t leak enough to cause a drip so when the hose from hell went out like the day I bought it I realized the bracket had no threads

 

[Revenant]

So you only want the plate with the orange o-ring in this picture? View attachment 81368

I have a junk motor I can pull mine off of, just want to make sure it's the right part haha.

Yes that’s the correct part and thanks that would help a lot just let me know how much you want and how much is shipping

 

[1950884]

ebay.co.uk

 

[Revenant]

ebay.co.uk

What was that link to? I have a 91 mr2

 

[Revenant]

So you only want the plate with the orange o-ring in this picture? View attachment 81368

I have a junk motor I can pull mine off of, just want to make sure it's the right part haha.

When you get the part off your junk motor can you pm your cost I’ll cover shipping too

 

[1950884]

What was that link to? I have a 91 mr2

eBay United Kingdom. I checked and they didn’t have any.

could you repair the one you have?

 

[Revenant]

Ummm the threads are gone so I’d have to rethread and put a threaded insert so imma wait for that will take a lot longer