MR2 Owners Club Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
For the 2017 season, I decided to convert my ITB MR2 to H Prod. Any suggestions on which Production mods would be the most bang for the buck? My motor will have the standard Prod limited prep upgrades (11:1, .400 lift, Megasquirt, balanced, etc.), so I'm really looking to concentrate more on handling/suspension upgrades. Thanks in advance!
 

·
Registered
Joined
·
1,277 Posts
There are few things that I would look at.

Quick and easy would be to buy the complete tubular arms with sphericals.

What do you have for suspension? I am a fan the DIY setup with modified MK2 front struts with MK1b rear struts housing Koni 8611 RACE shocks valved to your suspension setup.

Before just getting the biggest cams you can I would check and get the head and intake flowed together. Putting large cams will kill your dynamic compression, and to compensate that you increase the compression. However, we only get ~1 point of compression over our IT motor. The reason why I mention flowing the head and intake together is to get an idea of max flow. go a touch bigger than that as a starting point.

Mike Helm should still have the fiberglass molds if that is needed.

let us know how it goes!
 
1 - 2 of 2 Posts
Top