MR2 Owners Club Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3,210 Posts
Discussion Starter #1
Me and Gordon where e-mailing each other so here it is.

OK start at the bottom to get the flow of things.

help me out if i am giving out bad info.

Yes, please........
I have 3 of the short ones !
2 helicals, and one Cusco/Kazz type.
I believe your helical is correct.
If the AW11 N/A is 5.114, and yours is 5.175.
Then my long one has got to be for the late SW20 turbo.
I have never bid on any Celica diffs (ST162 etc.)


Here is what I found at Cusco-JP

Cusco p/n cars
------------------------------------------------------------------------------
111F AW11 AE82, 92, 101, 111 N/A

124F SW20 ST162,182,202 N/A

153F AW11, AE92, 101 SC, and SW20 turbo (early)

154F SW20 turbo (late)

----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Saturday, January 29, 2005 1:34 AM
Subject: Re: Toyota Helicals


OK the Kazz is 5.114
the p.n. is DBT1621
CODE 71243-246

First time I've opened the Box on the Kazz LSD.

I been putting the ring gears on them to see how the fit.

Want me to tell the MR2 racers you have LSD in stock?

David


In a message dated 1/29/2005 12:08:33 AM Mountain Standard Time, dua[email protected] writes:
Yes, please.
To confirm that I at least sent you one larger than the stock sized unit.
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Saturday, January 29, 2005 1:06 AM
Subject: Re: Toyota Helicals


I put a metal strait edge on top and bottom when I measured mine.
My Kazz is out in the garage want me to go get it?

David



In a message dated 1/29/2005 12:01:05 AM Mountain Standard Time, [email protected] Writes:
Oh Great !!
So there are 4 of them?

Measure your Kazz, and make sure it is shorter.

Here is what I am coming up with as far as lengths
(diff setting on flat surface, with strait edge across the top)
5.13", and 5.37"

----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Saturday, January 29, 2005 12:50 AM
Subject: Re: Toyota Helicals


mine is 5.175



http://www.trdparts.jp/parts_LSD_mechanical.html


http://www.trdparts.jp/list_race-mis_ae92.html


just change AE92 to other body codes to get more info--- example


http://www.trdparts.jp/list_race-mis_ae111.html

this page is not opening up for me

http://www.a-t-s-usa.com/ats-products/lsd-application-toyota.htm

i lost all the other good web sites (like Kazz)

basically there is the mr2/fx16 c-50
then the AE92 early AE101 C-52 (maybe EP82 EP91)
then AE101 and AE 111 C56
the AW11 (MR2 super charged) SW20 --- E51

HTH










In a message dated 1/28/2005 11:27:47 PM Mountain Standard Time, [email protected] writes:
OK, one more time if you would please..........
What ____ing helical goes in what ____ing transaxle?
(maybe if you tell me in an e-mail, I can save it, because my ____ing brain can't ! )

I have 4 diffs here,
3 are one size, one is slightly longer.

HELP !!

PS, since you got one from me, lets make sure I sent you the correct one, give me the overall length.
 
1 - 1 of 1 Posts
Top