MR2 Owners Club Forum banner

1 - 7 of 7 Posts

·
Moderator
Driving MR2s since '89
Joined
·
4,132 Posts
Discussion Starter #1
For those that may have missed the post in the suspension section:

I need these for the FRONT of my MK1.5, so I'm have having some made. See Techno Toy Tuning site for an example of what an RCA is.

These will be machined out of aluminum and be 7/8" thick, with the center locating "knob" in the middle 1/8" high (1.0" overall height). They will not be anodyzed, just raw aluminum. Price will be about $90 for a pair, less if more people are interested, since the machine shop charges much less per piece with larger order numbers. Longer bolts will also be included.

Speak up ASAP if you're interested. I'm taking the order to the shop tomorrow (Thursday) afternoon.

-Jim
 

·
Two 2s - 93T, 88 SC
Joined
·
2,965 Posts
I replied in the Suspension forum that I would be interested if they were available in a front and rear set, for the appropriate thickness needed for ST springs, which lower the car 1.2 inches.

John
88 SC, 93T
 
1 - 7 of 7 Posts
Top