Joined
·
213 Posts
Hi, I have an 88 AW11 and the ignition lock was drilled out so I have no way to turn ignition on in the car. It is going to be a race car so I plan on just having a switch panel but I need to know the pinouts so I know how the switch works and what needs to connect where. Currently I have this, after tracing the connector back to the traces on the back of the lock cylinder.
so if someone could either help me with what needs to be connected where, or has an ignition switch they could test, that would be much appreciated.
Pin | Color | Label |
---|---|---|
1 | Black/White | ST1 |
2 | Blue/Red | IG1 |
3 | Blue/Red | ACC |
4 | Black/Red | AM1 |
5 | Brown/Red | ST2 |
6 | nc | nc |
7 | Brown/White | IG2 |
8 | Brown | AM2 |