MR2 Owners Club Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi guys I am slowly working my way through a 2zz swap and have completely forgot the routing of the last few pipes in the engine. I have attached pictures for reference

1st Pic... The 2 outlets ether side of the large central one on the inlet manifold just after the throttle body, I know the large centre one goes to rocker cover, its just missing so i could take a clearer photo.
2nd picture... Tiny line from the lower side of the inlet manifold
3rd Picture ...Large spout from out of the block (Gearbox side)
4th Picture.. This small vac line from the evap valve, it looks like it goes to this brake booster spout in the firewall but that would be a strange setup so i thought I'd check

Just to note secondary air injection has been removed so its possible 1 is for that,

Any Help will be greatly appreciated,
Thank you
75597


75598

75600

75601
 

·
Registered
Joined
·
124 Posts
I'll take some pics of my totalled 7thgen when the lighting is better.
 
1 - 4 of 4 Posts
Top