MR2 Owners Club Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
9 Posts
So I'm attempting to install koni yellows into my struts, The inserts appear to be too long, I cannot get any thread engagement with the gland nut when they're inserted into the strut housing. I browsed the forums and some people were saying to grind the bottom of the strut in order to make it fit. I'm wary of doing that since its a pressurized cylinder. Has anyone done this job/know what im doing wrong? Heres a link to a vid for clarity:
Check the bottom of the strut tube for a previously installed shim or other obstruction.
 
1 - 1 of 1 Posts
Top