MR2 Owners Club Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,480 Posts
get some 1/4'' sockets and extensions. If you have those it should be easier. I had 3/8 and was a pain. Also, you might want to separate the wire harness by the fuel rail some. I trimmed off some tape so I could move the wires around better.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top