MR2 Owners Club Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
988 Posts
Discussion Starter #1
Just after a bit of advice on how to install the valve stem oil seals.

Do they simply push in place? How will I know they're in properly? Do they need to be lubed before inserting them?

Thanks for any advice.
Ant
 

·
Registered
Joined
·
4,420 Posts
Press them in with a 11mm deep socket. I like to use an old valve to keep it aligned in the process.

No lube necessary.
 
1 - 3 of 3 Posts
Top