MR2 Owners Club Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter #1
i just got the rear cd storage box for my mk2 and was wondering where to drill holes and how to install it???

im sure someone has posted this before...

please help... thanks :)
 

·
Registered
Joined
·
1,883 Posts
mine came in my car but maybe if you put it in place and looked where the screw holes are in the storage box that may be all you need.
 

·
Registered
Joined
·
4,367 Posts
does your come with a bracket or some kind of metal piece. It connects the cd storage box to the firewall. I think that you have to take off the firwall or make a hole in it. There are also four holes that you have to srew into the rear center console.
 

·
Registered
Joined
·
1,061 Posts
first, you hav to feel up behind the firewall carpet for two studs sticking out. they should be about a foot above your center armrest thing. those are the stucs that the CSB (cd storage box) bracket bolts to. all mkII's came with them, not just cars with the CSB from the factory. now you have to cut a hole in the firewall carpet so that you can get to the studs, don't cut it any wider than you have to, if you do, you'll be able to see it after you install the CSB. if you do it right, the CSB will cover up the whole completely. now, if you didn't get a little metal bracket with your CSB, find one. it slides onto the studs and secures with nuts. that gives you holes to screw your CSB into. the screws that go into the bracket are really the only 2 bolts you need. cars that were equipped with the CSB from the factory have to screws going into the armrest, but they really aren't necessary since the CSB won't be supporting much weight and is planty sturdy with only those 2 bolts. if you must have all four, just screw the screws for the bottom holes inside the CSB into your armrest.
 
1 - 5 of 5 Posts
Top