MR2 Owners Club Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
4,186 Posts
Discussion Starter · #1 ·
hooking up a autometer boost gauge...i need to run a vac line all the way back to a t in the intake mani correct(so long arse vac line)? where should i get my power and ground for it?

thanks
 

·
Registered
Joined
·
8,098 Posts
I pulled my IGN power from my TT harness. To run the vacume line, run it under the door sill through the grommet behind the drivers side seat.
 

·
Banned
Joined
·
1,034 Posts
I took mine from the vacuum on the brake vacuum booster. You can do this on 91 and 92. In 93 up I believe that they added a one way valve so it will not work to tap their.
 

·
Premium Member
Joined
·
12,271 Posts
emopunk96 said:
anyone else do this, or does it matter where u get vac from
Probably most owner's connect at the OEM pressure sensor, but it doesn'r really matter. You can use any line connected directly to the manifold.

bill
 

·
Registered
Joined
·
8,098 Posts
It doesn't really matter. I used to have mine off the boost pressure sensor also. But I moved mine to the BOV line later since its a little closer.
 
1 - 10 of 10 Posts
Top