MR2 Owners Club Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
481 Posts
Discussion Starter #1
What dowel pins are you to use when installing the hks cams? And what would be considered straight up?

Still getting no spark. The only thing I can see in may have messed up was my cam install.
 

·
Registered
Joined
·
481 Posts
Discussion Starter #3
I emailed hks. Hopefully they have some info.

I have a 2.2 crank machine to fit. I use my 3sgte crank sprocket. Is the timing straight the same or now different?
 

·
Registered
Joined
·
481 Posts
Discussion Starter #5
My cel is not coming on. But I am also running a Ap Engineering PFc. The commander turns on when I turn the key.
 

·
Posts with pics?
Joined
·
1,028 Posts
There's so much help here nowadays. ( read:sarcasm )
HKS cams won't have any marks. You're probably safe with the middle hole. You probably should use some adjustable timing gears and you MUST degree aftermarket cams.
 

·
Registered
Joined
·
4,290 Posts
Does this help? Camshaft Specs

Safe with middle hole and definitely turn motor by hand/wrench off the crank bolt. Make sure nothing hits, but I don't think you will unless your head is decked a lot.

No spark issue: This isn't a result of the Cams.
AP PowerFC. You're Gen2 for everything? Possibly the dwell settings are not correct for the Gen2 coil in the FC-Edit software? Do you have a datalogit?
 
1 - 8 of 8 Posts
Top