MR2 Owners Club Forum banner

1 - 5 of 5 Posts
C

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Working hard on getting off the struts and rebuilding with Koni's.....left the keys in the ignition and the *#%^$&!! Toyota security system locked the doors. Anyone have a good way to get back in?

Yes, it was the only key.....91 Turbo, T-tops
 

·
Registered
Joined
·
2,419 Posts
use a bent coat hanger, and put a piece of paper between the window and the coat hanger so you don't scratch it.... assuming you don't have a slimjim.... which you probably don't
 

·
Registered
Joined
·
1,237 Posts
haha sucks doesnt it. if you have access to welding rod it works much better than a coathanger. still stiff but slightly more flexible. this will sound bad but you literally can pry the window away from the weatherstripping. however you will want to disperse the force of the prying utensil over as much glass as possible or you will regret it. plus use something soft. and dont try and force it two feet out of the way i mean like 2 millimeters just to slide the wire in, if your power locks still work use the wire to push down the button if they dont work bend the wire 90 degrees at the end and use the manual lock release. good luck and dont break your window
 
C

·
Guest
Joined
·
0 Posts
Discussion Starter #5
Thanks folks. I actually got to the lock switch with a rifle cleaning rod....very small caliber!
 
1 - 5 of 5 Posts
Top