[shimric]

So I found some diagrams in the online bgb.....

see how it says location of splice points

Im 99% sure but doesnt that mean I can cut the wire there without risk of a fire or something to that horrible nature?

So basically can I cut/rewire/solder another wire to one thoes points in the diagrams??

 

[shimric]

does anyone know?

 

[Dijital357]

those things look confusing

 

[Project "2"]

Those points are insultated with electrical tape only. You can simply solder a new wire to those points. You will see what I mean when you get to the splice points. As far as safety goes, it shouldn't be a problem since all the circuits are protected by fuses or circuit breakers. Make sure you warp the splice point with electrical tape well.
Sorry for my poor english.

 

[shimric]

^^ you call that poor english?? thats better than me, ive spoken english since day 1.. but thanks for that,.. i had no idea about that i will deffinatly use one of thoes points.. one more question,.. can i use thoes points for anything??

 

[Project "2"]

It really depends. What are you trying to install? Only use them for triggering an other circuit or signal purposes. You are better off splicing the wire that you need than looking for the splicing point.

 

[shimric]

i need a ign wire for the op gauge and a + for the light on the gauge.

 

[Project "2"]

Oh i see.
Go ahead and splice the wires You can get ign. wire and power from ign. harness or wherever you perfer.