MR2 Owners Club Forum banner
1 - 2 of 2 Posts

·
Registered
Red Mk1a Mr2
Joined
·
49 Posts
Discussion Starter · #1 ·
I found a lot of corrosion in the passenger side fusebox near the footwell that has the blower relay. If anyone could link me the fuse diagram, that would be greatly appreciated. I pulled nearly all the wires and fuses out for inspection but came up short with the 2 top left plugs and was hoping to get some suggestions on how to get it out easier.
Electronic component Electrical wiring Engineering Wood Electronic engineering
 

·
Registered
Red Mk1a Mr2
Joined
·
49 Posts
Discussion Starter · #2 ·
below where the blower relay sits there was a 10 amp and 30 amp fuse, are those the right fuses or is it supposed to be 10 amp and 7.5 amp?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top