MR2 Owners Club Forum banner
1 - 3 of 3 Posts

·
Registered
Red Mk1a Mr2
Joined
·
45 Posts
Discussion Starter · #1 ·
I found a lot of corrosion in the passenger side fusebox near the footwell that has the blower relay. If anyone could link me the fuse diagram, that would be greatly appreciated. I pulled nearly all the wires and fuses out for inspection but came up short with the 2 top left plugs and was hoping to get some suggestions on how to get it out easier.
Electronic component Electrical wiring Engineering Wood Electronic engineering
 

·
Registered
Red Mk1a Mr2
Joined
·
45 Posts
Discussion Starter · #2 ·
below where the blower relay sits there was a 10 amp and 30 amp fuse, are those the right fuses or is it supposed to be 10 amp and 7.5 amp?
 

·
Premium Member
Joined
·
12,399 Posts
There should be a 10A "A/C" fuse and a 30A "HEATER" fuse. The 30A fuse is for the blower motor.
 
1 - 3 of 3 Posts
Top