MR2 Owners Club Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
140 Posts
Discussion Starter #1
I have a 92 hardtop that was originally NA but is now turbo. The fog lights that were put in were only for show and not functional. Well I want them functional. I felt the backside of them to see if they were wired and i can feel wires coming from them but I don't know where the wires go or how to go about wiring them up inside the car. I have the switch and relay but no other wires. What exactly do I need to do to get these working?
 
M

·
Guest
Joined
·
0 Posts
I have the same problem with my 91 NA....the switch actually has a light on it and it comes on when the lights come on....found all the same things you did....I couldnt figure mine out either.
 

·
Registered
Joined
·
762 Posts
I installed oem fogs on my '91 n/a that I had. What I did was use a donor wiring harness from an aftermarket fog light kit and wired everything up using that. Make sure you get the correct fuse for the harness, and you can make it look stock by using the factory switch on the inside.

Not sure if any of that helped, but it should give you an idea.
 
1 - 3 of 3 Posts
Top