MR2 Owners Club Forum banner


151 Views 1 Reply 2 Participants Last post by  Breed-Xtreme
Can someone that instaled one of the aftermarker tacs tell me which wires to connect where please.
1 - 2 of 2 Posts
you need to attach the signal wire to the ecu in the trunk

on mine it was pin number 20 on the 26pin connector ON MY 3S-GE engine
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.