MR2 Owners Club Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
I went this evening and started pushing the temp selector towards the far right (more heat) and it just stopped moving when I had pushed it about half an inch. if I put pressure on one side of it I can slide it all the way to the heat. What should I look at tomorrow when i go to take it apart? any help would be nice.
 

·
Registered
Joined
·
2,225 Posts
You can see the cables underneath the dash from the passenger side. You have to get on the floor and look up in there and try moving the selector and see if any of the cables move. Then after that you may have to remove the head unit with the selector on it to further diagnose it.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #7
as for the interior, here is my problem. I want to paint the car either blue, or silver. Which both would go well wilth a blue interior, but currently the car is red. Blue and red would look kinda funky. That's my only problem.
 
1 - 9 of 9 Posts
Top