MR2 Owners Club Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
162 Posts
Discussion Starter #1 (Edited)
Well guys im building my gen3. Port and polished head with 1mm over-zise valves. I was wondering what valves to get and if i could keep my old valve springs, if not which springs to get..?? 350 RWHP GOAL!!


1.3mm metallic headgasket
9.0:1 forged pistons with .020 overbore
just a lil' list on the internals....
keeping the ct20b trubo btw

thnx in advance guys...
 
1 - 3 of 3 Posts
Top