MR2 Owners Club Forum banner
1 - 20 of 57 Posts

·
Registered
Joined
·
1,316 Posts
Discussion Starter · #1 · (Edited)
I should probably sell some of this stuff i've acquired over the years. it's all in Denver but i will ship most things. If you want specific pics, please let me know. All prices do NOT include shipping.

Interior kinda
TRD semi-bucket seat okay condition (USA passenger, no brackets) - $500
TRD semi-bucket seat pair, great condition, no brackets - $2000 - less likely to ship
TOMs 350mm nardi personal wheel - $400
TOMs bar 'messer' boost gauge and Greddy oil pressure gauge in a RHD pillar gauge - $375
a few JDM trunk mats (condition varies) - $100-150
a couple JDM moulded trunk liners (condition varies) - $275-$350
Blitz shift knob - $50

OEM 98+ red stitch steering wheel - $365
used JDM moulded trunk liner - fair condition - $265
TOMs 355mm nardi wheel - $350
Greddy shift knob with new sticker - $75
94+ trunk lock cyl with Key and ignition - $250
OEM single din cupholder (only one available) - $175


Exterior (everything but the campos wing and T020 garnish is authentic)
used gladfab bi-xenon headlight kit - $265
Bomex rear bumper spats and center piece good shape (white) - $230
TOMs lower spoiler attached to painted (white) CF trunk lid - $700
TOMs CF hyper super induction intake box with HKS filter in very good shape - $900
TRD widebody front fenders need minor fg repair (one blue, one red) - $1000
JDM power folding mirrors, harnesses, relays, switch, EVERYTHING. (black, painted poorly) - $300
JDM "Man in dandism" gold tint rear windshield - $350
INNO roof rack with snowboard attachments - should work for all roofs - $275

CF 94+ tail light center garnish (unknown manufacturer but quality looks really nice) - $165
used OEM super red II 98+ wing - $450
used OEM 202 black "twin cam 16 turbo" trim - minor scuffs all tabs intact - $75
new campos CF ttop covers - $200
new MadPSI vented front fenders + front bumper extensions - $1000 (less likely to ship)
new Carbenfibrecreations FG border replica hood white gel (test fitted a while ago, fit pretty well) - $400 (probably won't ship)
new OEM RHD wiper cowl - $250
used OEM 98+ JDM clear corners - should probably be refinished and have a couple small cracks - $75
used OEM 98+ JDM clear corners WITH bulbs and harness - probably could use a refinish as well but no cracks. the plastic around the bottom of the lamps is also not great (not visible when installed) - $110
used OEM front bra - great condition - $100

used white 98+ wing - good condition - $450
new campos east bear wing - $155
Origin labs CF front canards - $250
JDM thin moulding (door, vent, rear bumper, front fender) - $250
used rookie side skirts - need work but anyone who does FG work should be able to repair - $265
phoenix power type I side skirts - $850
OEM side vents great shape (silver) - $100
TOMs roof scoop mint (red) - $300
ASK Sports front fenders - $850
rep(pretty sure) TOMs T020 tail light garnish affixed to OEM red 94+ tail panel with L brackets (no lights 94+) - $300
Border CF hood with border relocation kit - $1900 - will not ship but i will drive 12 hours from denver to meet you



Suspension kinda
new prothane urethane bushings - c-arm w/strut rd kit (18-303) in red - $45
used rear TRD sway bar with bushings (paint is also in poor condition) - $425
Kei Office coilovers with endlinks - unknown condition - $800
TOMs front and rear strut bars in very good OG condition, TOMs front tension rod - $600
TOMs used rear RCAs with all hardware in great shape - $175
TOMs used rear RCAs with only two bolts, paint in meh condition - $125
Apex'i adjustable front top hats - $175
Cusco type ST strut bars, powder coated in HKS purple, great condition - $275

Front and rear TRD strut bars newly powdercoated (rear badge is included but is used) - $850
Front and rear Cusco type OS strut bars (rear is used, front is new) - $275
used front and rear Cusco type OS strut bar - $170
authentic used TOMs front RCAs with hardware - not pretty but completely usable - $135
used front AND rear TRD strut bars in okay condition - some surface rust - $700
used front AND rear TRD sway bars paint in poor condition but structurally fine - rear bushings only - $550
used front AND rear TRD sway bars with bushings (will not separate - paint is in poor condition) - $750

Left and Right wilwood GT48 curved vane rotor (part 160-2540/1) and assembled hat (part 170-10690) plus adapter for front mr2 brakes for wilwood dynalite or dynapro (barely used) - $410
TOMs Rays C7R 17x8+35 17x9+35 silver, newly refinished - $1700
Zeal function coilovers - super rare, recently rebuilt by SCR in loveland, colorado. Front top hats are wilhelm top hats, original Zeals are included. These are top of the line dampening adjustable inverted monotube, have helper springs and adjustable end links for the front - $2000
TOMs front and rear strut bars, TOMs front tension rod, all probably need a refinish - $425
BNIB TOMs rear RESPO shocks 48531-TSW02 - $400


Performance kinda
used Gen2 ARC intake with NIB ARC filter - $360
used Gen3/4 apex'i intake - needs cleaning - $75
used MagnaFuel MP-4701 with custom billet bracket and fittings - idle time only - $675
used fullspeedtech gen2 3sgte haltech ps1/2000 patch harness -$275
spearco intercooler with apex'i BOV and gen4 piping - $850
Gen3 Garret GTX2863 phoenix power manifold turbosmart wg custom downpipe <1000 miles - $1800

new Gen2 new Moroso oil pan - $385
new 60-2 racer x crank trigger kit (minus the valve cover coil adapter bracket) + distributor cover - $260
used TRD exhaust (exhaust only, mates to stock b-pipe or have someone fab you up something nice) - $600 (likely will not ship)
used Berk ct2X DP + bracket + stock O2 sensor in great condition - $125
used Gen3/4 ARC intake - $385

used HKS SSQ BOV -$125
Ganador stainless exhaust, dent in one of the canisters but in very good condition overall - $950
phoenix power garage fukui intercooler for gen2/3 - $850
e153 Frana 5 gear straight cut dog box, all three billet shift forks, TRD lsd - freshly built, zero miles - $9k



Trades? probably not... Non-auto related stuff? probably not. Offers? probably not... i've priced everything below what is out there already. Or see below for bulk discount. Looking for cash or worst case, paypal (no F&F and no, i won't charge you the paypal fee).

Discount Policy :)
3-5 things - 10%
6-10 things -15%
11+ things - let's work something out

Jesus christ i have a lot of stuff for sale...

bret
 

Attachments

·
Registered
Joined
·
1,316 Posts
Discussion Starter · #12 ·
New front cusco bar sold. Also have a few more parts -- used TRD engine mounts, JDM [not that it matters] 93 front arms with brackets), other steering wheels (TRD type-a, TRD sportivo, TRD nardi, TOMs personal), more used TRD front and rear (both 22mm and one super rare 'hard type' 25mm) sway bars, TRD front strut bars, if anyone is interested.
 

·
Registered
Joined
·
609 Posts
You happen to be hoarding a top mount a2a somewhere in your garage? You suuuuure you don't have another GEN2 KU intake manifold sitting around that you forgot about? :)


Some good prices on this stuff. I paid more for my molding trunk liner than you were asking.. lol
 

·
Registered
Joined
·
1,316 Posts
Discussion Starter · #18 ·
Ha no top mounts... i've always been tempted on the border i/c but i never pulled the trigger on it.

Where were you when i tried for a while to sell those Gen2 KUs here a while ago lol.
 

·
Registered
Joined
·
609 Posts
Ha no top mounts... i've always been tempted on the border i/c but i never pulled the trigger on it.

Where were you when i tried for a while to sell those Gen2 KUs here a while ago lol.
Yeah, I think I am going to try building something similar to the Border one if I can't find something used over winter. Treadstone makes a pretty large same side in/out core that will fit.

This is Jason. We've discussed this on Facebook... :laugh:
 

·
Registered
Joined
·
1,316 Posts
Discussion Starter · #20 ·
Yeah, I think I am going to try building something similar to the Border one if I can't find something used over winter. Treadstone makes a pretty large same side in/out core that will fit.

This is Jason. We've discussed this on Facebook... :laugh:
LOL i had a pretty good idea it was you. I don't see the intercooler on the border site anymore, maybe they finally discontinued it :(
 
1 - 20 of 57 Posts
Top