MR2 Owners Club Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
913 Posts
Discussion Starter #1
FS: ‘87-89 4A-GE & C52 complete part out

I’m parting out a complete ‘88 4age 7-rib engine and revised c52 with axles set
Engine suffered overheating so the head is freakin warped at .018” way over the max warpage limit of .002” yikes!
Located at NM, 88011

Prices don't include shipping cost
valve train, cams w/gears n cam covers are salvageable $100
c52 trans no grinds or popouts $350
axles set no ripped boots $150
clutch slave mount bracket $30
flywheel $75
clutch inspection covers x2 $30
crankshaft still within oem specs $200
crank pulley no chips $50
timing belt covers x3 no cracks $40
intake manifold $40
throttle body assembly $40
TVIS assembly working condition $40
AFM in good working order $100
fuel rail w/stock yellow injectors $50
EGR valve w/modulator $40
Jimmy throttle cable bracket non-cruise $30
exhaust manifold w/heat shields no cracks $50
engine wiring harness complete $200
ECU stock $150
distributor $50
ignition coil w/igniter $50
A/C compressor w/idler pulley & mount bracket $120
ac compressor rubber flex lines set $50
alternator $50
starter $40

PayPal: [email protected]
 

Attachments

·
Registered
Joined
·
913 Posts
Discussion Starter #2
Most parts still available, exhaust manifold heat shield is sold everything else on list is available at obo
 

·
Registered
Joined
·
48 Posts
FS: ‘87-89 4A-GE & C52 complete part out

I’m parting out a complete ‘88 4age 7-rib engine and revised c52 with axles set
Engine suffered overheating so the head is freakin warped at .018” way over the max warpage limit of .002” yikes!
Located at NM, 88011

Prices don't include shipping cost
valve train, cams w/gears n cam covers are salvageable $100
c52 trans no grinds or popouts $350
axles set no ripped boots $150
clutch slave mount bracket $30
flywheel $75
clutch inspection covers x2 $30
crankshaft still within oem specs $200
crank pulley no chips $50
timing belt covers x3 no cracks $40
intake manifold $40
throttle body assembly $40
TVIS assembly working condition $40
AFM in good working order $100
fuel rail w/stock yellow injectors $50
EGR valve w/modulator $40
Jimmy throttle cable bracket non-cruise $30
exhaust manifold w/heat shields no cracks $50
engine wiring harness complete $200
ECU stock $150
distributor $50
ignition coil w/igniter $50
A/C compressor w/idler pulley & mount bracket $120
ac compressor rubber flex lines set $50
alternator $50
starter $40

PayPal: [email protected]
Hey bud i really need egr and modulator if its a na 1.6 plz if u can help it would be great my modular one of the **** broke of cant get hose on and i already bought the vacuum switch and got ripped off by a non mr2 guy my modulator is clogged and causing problems with my baby send me an email if you can help. Im glad i check this site daily. Hey thanks im in south florida
 

·
Registered
Joined
·
48 Posts
FS: ‘87-89 4A-GE & C52 complete part out

I’m parting out a complete ‘88 4age 7-rib engine and revised c52 with axles set
Engine suffered overheating so the head is freakin warped at .018” way over the max warpage limit of .002” yikes!
Located at NM, 88011

Prices don't include shipping cost
valve train, cams w/gears n cam covers are salvageable $100
c52 trans no grinds or popouts $350
axles set no ripped boots $150
clutch slave mount bracket $30
flywheel $75
clutch inspection covers x2 $30
crankshaft still within oem specs $200
crank pulley no chips $50
timing belt covers x3 no cracks $40
intake manifold $40
throttle body assembly $40
TVIS assembly working condition $40
AFM in good working order $100
fuel rail w/stock yellow injectors $50
EGR valve w/modulator $40
Jimmy throttle cable bracket non-cruise $30
exhaust manifold w/heat shields no cracks $50
engine wiring harness complete $200
ECU stock $150
distributor $50
ignition coil w/igniter $50
A/C compressor w/idler pulley & mount bracket $120
ac compressor rubber flex lines set $50
alternator $50
starter $40

PayPal: [email protected]
afloridaalso ac compressor. Prolly gone but just lmk hey thank you
 

·
Registered
Joined
·
48 Posts
FS: ‘87-89 4A-GE & C52 complete part out
(
I’m parting out a complete ‘88 4age 7-rib engine and revised c52 with axles set
Engine suffered overheating so the head is freakin warped at .018” way over the max warpage limit of .002” yikes!
Located at NM, 88011

Prices don't include shipping cost
valve train, cams w/gears n cam covers are salvageable $100
c52 trans no grinds or popouts $350
axles set no ripped boots $150
clutch slave mount bracket $30
flywheel $75
clutch inspection covers x2 $30
crankshaft still within oem specs $200
crank pulley no chips $50
timing belt covers x3 no cracks $40
intake manifold $40
throttle body assembly $40
TVIS assembly working condition $40
AFM in good working order $100
fuel rail w/stock yellow injectors $50
EGR valve w/modulator $40
Jimmy throttle cable bracket non-cruise $30
exhaust manifold w/heat shields no cracks $50
engine wiring harness complete $200
ECU stock $150
distributor $50
ignition coil w/igniter $50
A/C compressor w/idler pulley & mount bracket $120
ac compressor rubber flex lines set $50
alternator $50
starter $40

PayPal: [email protected]
iothi have downpipe need pipe with cat and mufflers with tip or tips plz contact me 9546426872 larry. Also need some other parts i have 87aw11 and sw20 turbo have lists of parts needed for both. Ty for ur time.
1566332714.jpg
1566332714.jpg
20201123_164522_HDR.jpg
Message_1608412462847.jpg
1566332714.jpg
 
1 - 9 of 9 Posts
Top