[Dennis]

Mod List:

@ 17.5 PSI [just under 1.2 bar]
98 Spec 3SGTE
Berk GT3076R w/ Anti Surge
on stock ECU
4" Custom Intake
Phoenix Power IC [no fan]
NGK BKR7E
HKS Super Dual Dragger Exhaust
Half & Half Gas Mix [91 octane & 100 octane]


Run 001 : 3rd gear pull @ 1.1BAR 290.79 whp 247.57 wtq
Run 002: 4th gear pull @ 1.2BAR 314.04 whp 250.82 wtq
Run 003: 4th gear pull @ 1.2BAR 311.13 whp 248.91 wtq

Run 001 3rd gear pull; let off @ 6500 rpm
Run 002 4th gear pull; to 7200 rpm
Run 003 4th gear pull; to 7000 rpm


Another gen3 on an MK1 [KGRgunman (w/ MK1.5)] ran 233 whp 208 wtq @ 12PSI completely stock with ST205 A2W IC.

Dennis
Let me know what you guys think!

 

[EvilElvis]

nice numbers!

 

[MIDSHIP909]

nice! time to get some cams den

 

[ATSAaron]

What boost controller are you using? That turbo looks about 500 rpm laggier than my "old" TD06 :-(

Aaron

 

[tee]

nice run den..the numbers looks about right.

 

[Dennis]

What boost controller are you using? That turbo looks about 500 rpm laggier than my "old" TD06 :-(

Aaron

greddy profec b not the new spec2. the dyno guy actually lets the rpm drop low and then starts wot from there, if that makes a difference.

Evil, Mdship, tee; thanks.

Dennis

 

[timmyc]

440 injectors?

 

[redmr2_man]

Dennis, time for SARD 800's and an AEM/PFC



p.s. I'd love to put down 300+ rwhp at 1.2 psi

 

[tee]

440 injectors?

gen3 540s

 

[steeb]

looks like that turbo wants the engine to rev higher

 

[Piddy]

Nice numbers, Den. When are we hittin the track again?

 

[Dennis]

Dennis, time for SARD 800's and an AEM/PFC



p.s. I'd love to put down 300+ rwhp at 1.2 psi

hahaha, i had to re-read my post...1.2psi!

Apexi PFC for me, should be picking it up this month, unemployment sux.

gen3 540s

thanks tee.

looks like that turbo wants the engine to rev higher

dont have the money to make it rev higher, im fine with 7250 redline,

Nice numbers, Den. When are we hittin the track again?

thx, i wanna drag again, is ur car done?

Dennis

 

[Dennis]

just got my new intake, after the dyno, it will have a funnel [velocity stack] and a 6"ID 7.5x6 Filter

Dennis

 

[JRunSW20]

For 17psi not bad..now get tuned at 19

 

[Dennis]

For 17psi not bad..now get tuned at 19

it will be tuned for 21psi.

Dennis

 

[MasonF]

it will be tuned for 21psi.

Dennis

Jeez...you'll probably be making like what, ~360 whp? Give me a ride in your car please :smile:

 

[mr2spec]

i wanna feel 360 whp too, pretty please... nice numbers btw. and that custom intake looks pretty damn cool

 

[CaliMr951]

how much improvement would you have if you had a stand alone ecu and more fuel?

 

[Dennis]

how much improvement would you have if you had a stand alone ecu and more fuel?

stand alone and more fuel, with good tune, i should be able to hit 375-400rwhp

Dennis

 

[VPBOMBER]

nice dennis like the numbers