I'm kind of partial to the 'Pfeiffer Coupe'... it looks like those lights originally come on Fiat. They look mean, in a good way :thumbup !
What about NSX low-rise pop ups? Anyone find picture of those actually installed on an MR2?
I think the 4-Beams look easiest to do out of all of them.
You would just need to raise bezel up (a little higher than this pic) to hold 4x6 sealed beam (or H-4) two filament light, and make a "filler" to add to OEM light shroud. Then shorten arms like Rev6 kit does. Viola'!
I picked up a set of GE Nighthawk LED headlights from Amazon. These headlights are rebranded Truck-Lite 27450c headlights. (Philips also rebrands a version of the same light)
For the past decade I've been running Hella H4 E-code housings with Hella 100/80 xenon bulbs. I compared those with the...
I have a 1985 Toyota MR2. I have found a number of sites that suggest the problem with dash lights and now headlights is in the headlight switch (either solder has come loose on the contacts or the switch may be bad -- I suspect it is decaying solder). However, I cannot find a description of...
Here's a little how to convert your gauge cluster to LED
4x 1W LED
Phillips screw driver
Needle nose pliers
Some good glue
1. Go on e-bay and buy 4x 194 1W LED, you'll recognize the picture of the LED
2. Wait undetermined amount of time for delivery
3. Open mail box, take package...
Hello there. I just purchased my first MR2. A 92 turbo. Car is pretty much all stocK. Interior lights, low beams, and flasher high beams work, but when I push the stalk away from me to set the high beams on, the headlights just all turn off, until I flip it back then the low beams turn on. The...