MR2 Owners Club Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
351 Posts
Discussion Starter · #1 ·
I cant find it and I need one or any suggestions would be appreciated. These metal pipes in the in the air intake hoses on the MR2 specifically the 3sgte. I know this isnt the hose for one but an example but the small metal pipes that connects the bov, catch can stuff like that.
 

Attachments

·
Super Moderator
Driving MR2s since '89
Joined
·
4,899 Posts
The bead on either end of the pipe assures it doesn't come loose, which a generic piece of pipe wont have.
However that connection is only under light vacuum, so it's unlikely to be a problem. If you're lucky a piece of 3/4" copper pipe would work there - or a "nipple" designed for joining two sections of 3/4" pipe if you need something a little larger in diameter.
 

·
Registered
Joined
·
351 Posts
Discussion Starter · #10 ·
The bead on either end of the pipe assures it doesn't come loose, which a generic piece of pipe wont have.
However that connection is only under light vacuum, so it's unlikely to be a problem. If you're lucky a piece of 3/4" copper pipe would work there - or a "nipple" designed for joining two sections of 3/4" pipe if you need something a little larger in diameter.
Yeah I just came back from Home Depot I was looking at that I take it if you put a good clamp on it without crushing it you should be good. Thanks everyone.
 
1 - 11 of 11 Posts
Top