MR2 Owners Club Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
813 Posts
Discussion Starter #1 (Edited)
anybody have a hacked up 87+ engine harness? (na or sc)

I dont want to wreck a good harness but i need a connector from an 87+ harness.

I need the molex connector that connects the engine harness to the body harness. it is a big white connector you cant really miss it if you can get me that with about 6 - 10 inches of wire...i can paypal you right away

i need the engine harness side

thanks
email me
[email protected]
 

·
Registered
Joined
·
3,660 Posts
had a hacked up harness from my 20v swap, but that connector i used, no luck there.
 

·
Premium Member
Joined
·
3,104 Posts
I think I have one, but its from an 86. Should be the same connector though. It might have a few pins rearranged. Shoot me an email if intrested.
 

·
Premium Member
Joined
·
3,104 Posts
Compared the two connectors (I have an extra 87 harness that I won't cut). They are physically the same, most of the wire colors are the same. Looks like 4 or 5 wires are different or missing on the 86 one.

What is your situation?
 

·
Registered
Joined
·
813 Posts
Discussion Starter #8
i have an 87+ car and i am doing an engine swap, to simplify wiring i am going to splice the old connector onto the new engine harness. If need be i can use my old connector but it is a gze harness that i dont particularly want to hack up....
 

·
Registered
Joined
·
813 Posts
Discussion Starter #9
I haven;t looked at the connector to closely is it possible to repin it? without too much hassle??
 
1 - 11 of 11 Posts
Top