MR2 Owners Club Forum banner

1 - 8 of 8 Posts

·
Premium Member
Joined
·
3,646 Posts
Discussion Starter #1
17x8 +30 front 215/40/17
17x9 +40 rear 245/40/17

Will I need to roll anything? What about the front fitting?
 

·
Registered
Joined
·
1,721 Posts
fronts will fit, with a 215/40/17 u won't rub. but the front wheel will stick out past the fender a little bit.

the rears will rub for sure. you will need to roll them, unless your car isnt lowered.
 

·
Premium Member
Joined
·
13,210 Posts
The front will be 5mm PAST the fenders. The rears will be 5mm tucked in, and will probably clear fine with the 245, (might need slight fender rolls). Should be able to fit a 255 with fender rolls as well.
 

·
Premium Member
Joined
·
3,646 Posts
Discussion Starter #5
woudl 17x8 +40 work? Or will it hit teh suspension? I got eibach sportlines on koni yellows.
 

·
Premium Member
Joined
·
13,210 Posts
40 is PROBABLY safe, although I have heard of it being very close. You might want to look into some 2mm or so spacers if you have issues with it, but spacers that small are very cheap (15 bucks on ebay).
 

·
Premium Member
Joined
·
3,646 Posts
Discussion Starter #8
WyrmMaster said:
40 is PROBABLY safe, although I have heard of it being very close. You might want to look into some 2mm or so spacers if you have issues with it, but spacers that small are very cheap (15 bucks on ebay).
Id rather avoid spacers at all costs. just cause they arne't hub centric. And I relaly don't have to buy $100 H&H spacers.
 
1 - 8 of 8 Posts
Top