MR2 Owners Club Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
211 Posts
Discussion Starter #1
Hi All,

On rebuilding engine plan, i am also looking into the possibility of replace intercooler. i am doing research on the side mount (stock location) InterCooler on CT26, CT20b, or CT27 with 15~16 psi with stock fuel setup.

Would my application benefit from having an aftermarket side mount IC over stock IC?

How about truck mount IC; i dont know if truck mount IC would help CT26/CT27 at all (15-16 psi)..

Any suggestions? thanks in advance.

-jjc.
 

·
Registered
Joined
·
1,029 Posts
aftermarket replacement for stock = YES!

from what i've read, it seems that a trunk mount is overkill for the turbos you listed.
 

·
Automotive cartographer
Joined
·
4,402 Posts
jjcnsx said:
How about truck mount IC; i dont know if truck mount IC would help CT26/CT27 at all (15-16 psi)..
A truck mount? You mean an IC so large that it must be carried by a truck driving behind you? I wouldn't recommend it.

Even a trunk mount is a little much for your intended application.

An aftermarket side-mount should be perfect.
 
1 - 4 of 4 Posts
Top