MR2 Owners Club Forum banner

1 - 8 of 8 Posts

·
Thailand rules!
Joined
·
6,838 Posts
Discussion Starter #1

·
Registered
Joined
·
213 Posts
dude i want one......seems a little more involved than i thought. Im not good with drilling maybe its cuz of my cheap drill bits. But i gotta try this out. Thanx for the right up. :thumbup
 

·
Registered
Joined
·
2,606 Posts
Good Job Marc!!
We should have a "Tranny Swap Sticky(JDM FWD 6spd)" with links to all the documented tranny swaps, and tranny info.
If I get this C60 I've been looking at, I'll take some pics and document things for reference. I'll be looking to convert the C60 to AW11 NA axles, using C5x TRD 2-Way LSD, and C5x diff. bearings.
 

·
Thailand rules!
Joined
·
6,838 Posts
Discussion Starter #8 (Edited)
R E D said:
Good Job Marc!!
We should have a "Tranny Swap Sticky(JDM FWD 6spd)" with links to all the documented tranny swaps, and tranny info.
If I get this C60 I've been looking at, I'll take some pics and document things for reference. I'll be looking to convert the C60 to AW11 NA axles, using C5x TRD 2-Way LSD, and C5x diff. bearings.
Sounds cool! I'd be curious to see what it takes to make that work.
Marc

PS, one thing I forgot to mention is trans weight. The 6 speed with all brackets etc, was 6 pounds more than the bare C50 with 2.5 quarts of oil. So I'd say it's about 10 pounds heavier.
 
1 - 8 of 8 Posts
Top