MR2 Owners Club Forum banner

1 - 1 of 1 Posts

27 Posts
Discussion Starter #1
Does anyone know of an aftermarket source for the pulley that is used to tension the accessory belt components
(Alternator, AC Compressor) for a 1989 SC? The pulley is somewhere on the freeway. I found the belt.

Note, this pulley has a smooth outside circumference (no grooves). It tensions by pushing down on the top of the
serpentine belt's smooth surface (not the grooved portion). There's a slot the pulley slides up and down
on to make the adjustment.. I just need the pulley, and maybe a nut! The rest of the hardware is still intact and
mounted to the alternator bracket.

My efforts have only come up with pulley's that have the grooves in them. I need the pulley with the smooth surface.
1 - 1 of 1 Posts