MR2 Owners Club Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
I was watching a guy build his turbo 4age. He didnt say anything about it but he had a fitting sticking out of the end of the head. What he had done was remove one of the hex plugs and put a push lock fitting in it for better breathing.

Have any of you see or done that to your car and have any of you had any issues from it?
 

·
Registered
Joined
·
468 Posts
I ended up putting a breather fitting in the oil pan with a big catch can that drains back to the oil pan. I did this so that fresh air can get into the bottom of the crankcase and move all of the blowby gases out.
 

·
Registered
Joined
·
34 Posts
Discussion Starter · #3 ·
I ended up putting a breather fitting in the oil pan with a big catch can that drains back to the oil pan. I did this so that fresh air can get into the bottom of the crankcase and move all of the blowby gases out.
I like it, ill probeally end up doing that, and I got another valve cover set so I can have two breathers on top.
 
1 - 3 of 3 Posts
Top