MR2 Owners Club Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter #1
hey guys,
kinda new to the board, just lurking and reading.
im building a 3sgte block with a 3sge head. mainly to take advantage of the oil squirtes in the block. anywho, i was wondering if the 3sgte valves are the same as the 3sge's. any help would be appreciated. also, what aftermarket valves would you reccomend?
thanks!
 

·
Registered
Joined
·
2,113 Posts
use a pneumatic valve system :thumbup
 

·
Premium Member
Joined
·
9,213 Posts
what gen do you have.. im almost sure that second gen has them and sure that third gen has them already..
 

·
Premium Member
Joined
·
9,213 Posts
Just confirmed it.. The second and third gen have oil squirters.

You are also going to need to bring the compression up on those turbo pistons. i have a set of 10:1 compression Gen 3 86mm pistons. e-mail me or PM me if interested...
 

·
Registered
Joined
·
36 Posts
Discussion Starter #7
eazy2001x said:
Just confirmed it.. The second and third gen have oil squirters.

You are also going to need to bring the compression up on those turbo pistons. i have a set of 10:1 compression Gen 3 86mm pistons. e-mail me or PM me if interested...
yea i know they have oil squirtes, just wondering if the valves in the head were different as ferrea has 2 differnt sets. just wondering if the valves they list are either for the 3rd gen or something.

thanks for the offer on the pistons. i already have some custom set of 11.8:1 pistons:)
 
1 - 7 of 7 Posts
Top