MR2 Owners Club Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
0 Posts
Discussion Starter #1
Hello. I have installed 3SGE Beams 5th Gen in my Toyota Mark 2, 1973.

The problem with install was, I had to make a custom oil sump because the original oil sump was hitting the main subframe of the car.

Now, the problem is, in between this process, as you might all know, the oil filter position is just above the sump, in the silver chamber, I had removed that oil gallery altogether and chopped that portion which contained the oil filter housing.

Now the pressure in the line is too much and it is not taking the filter in the above position, which is there for a secondary filter placement. Whenever I apply filter on the second position just below the exhuast manifold, the oil filter leaks due to immense oil pressure.

What can I do to install a oil filter in this secondary position and how can I reduce the oil pressure so that oil filter can sustain it ?
 

·
Registered
Joined
·
0 Posts
Discussion Starter #2
Admin, please move this thread to the correct section, I think I am not in the correct section, thank you.
 
1 - 2 of 2 Posts
Top