MR2 Owners Club Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
818 Posts
Discussion Starter #1
293 RWHP 258 TQ

Here is my OEM Rav4 ECU 2GRFE dyno with Ebay "3 Intake and 3" single exhaust. The RPM pickup had a mishap so the numbers are skewed at the end of the runs. The AFR on the car is closer to right than the sensor they clamp in the tip too. This is at about 50-100 ft above sea level.





GoPro Video in the car
 

·
Registered
Joined
·
818 Posts
Discussion Starter #3
Oh, yeah, I have Gouky's headers. I built the Y pipe and exhaust though. 2.25 on the Y and merges into 3". Seems to flow well enough. I also have a paper cone filter and an air straightener in the intake pipe.
 
1 - 6 of 6 Posts
Top