MR2 Owners Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. MKI, 84-89 NA & SC
    For a while I’ve had a oil leak that comes and goes it seems to be coming from the exhaust side I’ve taken off the cover and reapplied rtv under the cam cap and the seal seems to be fine and was replaced ~1000miles ago I also replaced the distributor o ring while the cap dried, the leak will...
  2. MKII, 90-99 NA & Turbo
    Is there any task on these cars that is not a tremendous pita??? All the crap you have to move out of the way just to do a valve cover gasket. Can anyone tell me what the intruding pipe is over the driver side of the valve cover? Bill North Vancouver
  3. MKII, 90-99 NA & Turbo
    Hi there, I have a 93 Mr2 that I've been slowly fixing and updating things on, and I recently just hit a snag with a leak the car developed. In few days I was going to do a coolant flush because the coolant has turned a brownish color which I only just recently noticed, but my brother pointed...
  4. MKI, 84-89 NA & SC
    Hey guys. I have an 87' MR2 with a 4agze swap and i'm having some issues with the amount of smoke it puts out. It starts fine, but if you let the engine idle for awhile or give it throttle the engine starts to pour out a lot of smoke both from the exhaust, and from where the exhaust manifold...
  5. 3SGTE Turbo
    Oil leaks pissing me off. Update: Headgasket most likely Just cleaned up the engine and put her back in. New valve cover gasket and allen bolts last spring. Still leaks. New cam seals last fall. Still leaks. New distributor seals this summer. Still leaks. Im at a loss. It seems to weep from...
  6. 3SGTE Turbo
    I've been letting this leak for thousands of miles so now I'm taking care of it. I had thought I would pull the covers off to find the cams or crank seal leaking, but it doesn't look like it. The alternator and oil pan were first coated. Lots of oil on the crossmember and everything on the rear...
1-6 of 6 Results