MR2 Owners Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Normally Aspirated
    Hi guys, I have a Rev2 Mk2 with a Rev3 engine swapped into it. It supposedly has a Rev3 engine loom from the previous owner, but igniter 89621-26010 195 that I bought from a breaker wont fit it (fat side of the plug and thin side are flipped around)? It had a 205 ignitor on it when I bought it...
  2. 3SGTE Turbo
    I'm new here and I need help with this ongoing problem. I own a JDM 1992 MR2. Body has over 200,000 km but I replaced the engine in 2012 with about 50,000km. Car had been running fine for years until a few weeks ago when I drove it to an appointment and when I wanted to leave I had trouble...
  3. MKI, 84-89 NA & SC
    Hi guys, I have a 20v aw11. Just remade part of my loom that runs to the ignitor/coil. Finished the job and turned the ignition on (but didn't try start it as I currently have no fuel pressure. It sat for close to 5 minutes before popping and smoking. Now before I tear this loom apart tomorow...
1-3 of 3 Results
Top